MAPK14 Knockout raw264.7 Cell Line
Product classification
Welcome to consult Elem's high-throughput CRISPR service.
Contact us to orderMAPK14 Knockout raw264.7 Cell Line
Product ID： LM02042053436
Market price
Stock surplus
0
Antibody custom service consulting
隐藏域元素占位
- 产品描述
- 细胞复苏
- 细胞传代
- 细胞冻存
- 抗体验证结果
-
- Brand: ELEM粒曼
- Commodity name: MAPK14 Knockout raw264.7 Cell Line
- Commodity ID: LM02042053436
- Gene Symbol: Mapk14, Crk1, Csbp1, Csbp2
- Ensembl ID: ENSMUSG00000053436
- Uniprot ID: P47811
- 宿主细胞 / 类型: RAW 264.7/mouse monocyte-macrophage leukemia cells
- NCBI Gene ID: 26416
- 规格: 1×10^6 cells/frozen vial
- 生长培养基: DMEM + 10% FBS + 1% P/S
- 筛选标记: N/A
- 生长特性: Adherent cells, irregularly shaped
- 培养条件: Incubator at 37°C with 5% CO2; passage at a ratio of 1/6 to 1/8.
- 倍增时间: ~12-30 hours
- 参考换液频率: 2–3 times per week
- 支原体检测结果: Negative
- 敲除效率（Sanger测序）: 100%
- 蛋白质组验证结果: N/A
- 抗体货号: Adding...
- 目标基因介绍: Serine/threonine kinase which acts as an essential component of the MAP kinase signal transduction pathway. MAPK14 is one of the four p38 MAPKs which play an important role in the cascades of cellular responses evoked by extracellular stimuli such as pro-inflammatory cytokines or physical stress leading to direct activation of transcription factors. Accordingly, p38 MAPKs phosphorylate a broad range of proteins and it has been estimated that they may have approximately 200 to 300 substrates each. Some of the targets are downstream kinases which are activated through phosphorylation and further phosphorylate additional targets. RPS6KA5/MSK1 and RPS6KA4/MSK2 can directly phosphorylate and activate transcription factors such as CREB1, ATF1, the NF-kappa-B isoform RELA/NFKB3, STAT1 and STAT3, but can also phosphorylate histone H3 and the nucleosomal protein HMGN1. RPS6KA5/MSK1 and RPS6KA4/MSK2 play important roles in the rapid induction of immediate-early genes in response to stress or mitogenic stimuli, either by inducing chromatin remodeling or by recruiting the transcription machinery. On the other hand, two other kinase targets, MAPKAPK2/MK2 and MAPKAPK3/MK3, participate in the control of gene expression mostly at the post-transcriptional level, by phosphorylating ZFP36 (tristetraprolin) and ELAVL1, and by regulating EEF2K, which is important for the elongation of mRNA during translation. MKNK1/MNK1 and MKNK2/MNK2, two other kinases activated by p38 MAPKs, regulate protein synthesis by phosphorylating the initiation factor EIF4E2. MAPK14 also interacts with casein kinase II, leading to its activation through autophosphorylation and further phosphorylation of TP53/p53. In the cytoplasm, the p38 MAPK pathway is an important regulator of protein turnover.
- 细胞开发路径: A stable KO cell line was generated using the CRISPR‑RNP approach; Sanger sequencing confirmed 100% knockout efficiency in the KO cell line.
- 应用: A gene-knockout cell line with high knockout efficiency, particularly well suited for preliminary functional analyses, the development of complex disease models, precision drug screening, and broad‑scale gene discovery studies.
Key words:- Mapk14
- Crk1
- Csbp1
- Csbp2
-
01. Preheat the complete culture medium in a 37°C water bath.
02. Thaw the cryovial in a 37°C water bath for 1–2 minutes.
03. Transfer the cryovials into a biosafety cabinet and wipe their surfaces with 70% ethanol.
04. Unscrew the cap of the cryovial and gently transfer the cell suspension into a sterile centrifuge tube containing 9 mL of complete culture medium.
05. Centrifuge at room temperature at 125g for 5–7 minutes, then discard the supernatant.
06. Resuspend the cell pellet in 5 mL of complete culture medium, and transfer the cell suspension to a T25 culture flask.
07. Transfer the cells to a 37°C incubator with 5% CO2 for culture.
08. Recommended passage ratio: 1/6 to 1/8; cells reach confluence in 2–3 days. -
01. When the cell confluence in the culture flask reaches 80%–90% or higher, cells can be passaged.
02. Remove the culture medium, PBS, and trypsin (0.25% Trypsin‑EDTA, Gibco 25200‑056) from the 4°C refrigerator, place them in a 37°C water bath, and once their temperature approaches 37°C, take them out. Spray the exterior of the bottles with 75% ethanol, then transfer them to a biosafety cabinet.03. Remove the culture flask to be passaged from the incubator, spray the exterior of the flask with 75% ethanol, and place it inside a biosafety cabinet.
04. To avoid dispersing the cells, gently rinse the cells along the inner wall of the culture flask with PBS; discard the wash solution, and add 2 mL of PBS to the T25 flask.
05. Add the appropriate volume of trypsin (1.5 mL for a T75 flask, 0.5 mL for a T25 flask), and gently swirl the flask to ensure the enzyme evenly covers the cell‑covered bottom. Adjust the volume as needed based on the specific situation. After approximately 1–2 minutes, when most of the cells have detached, add the corresponding volume of complete culture medium to stop the digestion, then gently pipette up and down with a 5‑mL pipette until all cells are fully detached.
06. Transfer the cell suspension to a 15 mL centrifuge tube, centrifuge at 300 × g for 5 minutes, and discard the supernatant.
07. Transfer 5 mL of complete culture medium to resuspend the cells, adjust the seeding ratio as needed, and replenish the culture flask with complete medium—add up to 13–15 mL for a T75 flask and 5 mL for a T25 flask—then supplement with 1% double antibiotic solution.
08. After capping the bottle and tightening the lid, gently shake the vial to ensure uniform mixing of the cells, then place it in a 37°C incubator with 5% CO2. -
01. Prepare the cryopreservation solution and pre-cool it in advance.
02. Ensure that the cells to be cryopreserved meet the cryopreservation requirements, and verify the following conditions under a microscope: healthy appearance and morphological characteristics, being in the late logarithmic growth phase, and showing no signs of contamination or senescence.
03. Digest and centrifuge the cells (refer to the subculture protocol for specific steps).
04. Resuspend the cells in cryopreservation medium at 1 mL per tube, gently pipette up and down to ensure uniformity, then aliquot into cryovials.
05. Place the cells in a programmed cooling box and freeze them in a −80°C freezer.
06. Subsequently, the cells are transferred to a liquid nitrogen tank for long-term storage. - In antibody validation
Previous Page
Next Page
Classification： Gene Knockout Cell Line（Cell Line）
Cell Line Information
Gene Symbol
Mapk14, Crk1, Csbp1, Csbp2
NCBI Gene ID
26416
Ensembl ID
ENSMUSG00000053436
Uniprot ID
P47811
Screening marker
N/A
Host cell/type
RAW 264.7/mouse monocyte-macrophage leukemia cells
Specifications
1×10^6 cells/frozen vial
Growth Medium
DMEM + 10% FBS + 1% P/S
growth characteristics
Adherent cells, irregularly shaped
culture condition
Incubator at 37°C with 5% CO2; passage at a ratio of 1/6 to 1/8.
doubling time
~12-30 hours
Reference fluid change frequency
2–3 times per week
Mycoplasma test results
Negative
Knock-out validation
Knockout efficiency (Sanger sequencing)
100%
Proteome Validation Results
N/A
Antibody number
Adding...
Antibody validation results
Cell Line Description
Introduction of target gene
Serine/threonine kinase which acts as an essential component of the MAP kinase signal transduction pathway. MAPK14 is one of the four p38 MAPKs which play an important role in the cascades of cellular responses evoked by extracellular stimuli such as pro-inflammatory cytokines or physical stress leading to direct activation of transcription factors. Accordingly, p38 MAPKs phosphorylate a broad range of proteins and it has been estimated that they may have approximately 200 to 300 substrates each. Some of the targets are downstream kinases which are activated through phosphorylation and further phosphorylate additional targets. RPS6KA5/MSK1 and RPS6KA4/MSK2 can directly phosphorylate and activate transcription factors such as CREB1, ATF1, the NF-kappa-B isoform RELA/NFKB3, STAT1 and STAT3, but can also phosphorylate histone H3 and the nucleosomal protein HMGN1. RPS6KA5/MSK1 and RPS6KA4/MSK2 play important roles in the rapid induction of immediate-early genes in response to stress or mitogenic stimuli, either by inducing chromatin remodeling or by recruiting the transcription machinery. On the other hand, two other kinase targets, MAPKAPK2/MK2 and MAPKAPK3/MK3, participate in the control of gene expression mostly at the post-transcriptional level, by phosphorylating ZFP36 (tristetraprolin) and ELAVL1, and by regulating EEF2K, which is important for the elongation of mRNA during translation. MKNK1/MNK1 and MKNK2/MNK2, two other kinases activated by p38 MAPKs, regulate protein synthesis by phosphorylating the initiation factor EIF4E2. MAPK14 also interacts with casein kinase II, leading to its activation through autophosphorylation and further phosphorylation of TP53/p53. In the cytoplasm, the p38 MAPK pathway is an important regulator of protein turnover.
Cell development path
A stable KO cell line was generated using the CRISPR‑RNP approach; Sanger sequencing confirmed 100% knockout efficiency in the KO cell line.
Application
A gene-knockout cell line with high knockout efficiency, particularly well suited for preliminary functional analyses, the development of complex disease models, precision drug screening, and broad‑scale gene discovery studies.
Cell Culture Instructions
Cell Resuscitation
01. Preheat the complete culture medium in a 37°C water bath.
02. Thaw the cryovial in a 37°C water bath for 1–2 minutes.
03. Transfer the cryovials into a biosafety cabinet and wipe their surfaces with 70% ethanol.
04. Unscrew the cap of the cryovial and gently transfer the cell suspension into a sterile centrifuge tube containing 9 mL of complete culture medium.
05. Centrifuge at room temperature at 125g for 5–7 minutes, then discard the supernatant.
06. Resuspend the cell pellet in 5 mL of complete culture medium, and transfer the cell suspension to a T25 culture flask.
07. Transfer the cells to a 37°C incubator with 5% CO2 for culture.
08. Recommended passage ratio: 1/6 to 1/8; cells reach confluence in 2–3 days.
cell passage
01. When the cell confluence in the culture flask reaches 80%–90% or higher, cells can be passaged.
02. Remove the culture medium, PBS, and trypsin (0.25% Trypsin‑EDTA, Gibco 25200‑056) from the 4°C refrigerator, place them in a 37°C water bath, and once their temperature approaches 37°C, take them out. Spray the exterior of the bottles with 75% ethanol, then transfer them to a biosafety cabinet.
03. Remove the culture flask to be passaged from the incubator, spray the exterior of the flask with 75% ethanol, and place it inside a biosafety cabinet.
04. To avoid dispersing the cells, gently rinse the cells along the inner wall of the culture flask with PBS; discard the wash solution, and add 2 mL of PBS to the T25 flask.
05. Add the appropriate volume of trypsin (1.5 mL for a T75 flask, 0.5 mL for a T25 flask), and gently swirl the flask to ensure the enzyme evenly covers the cell‑covered bottom. Adjust the volume as needed based on the specific situation. After approximately 1–2 minutes, when most of the cells have detached, add the corresponding volume of complete culture medium to stop the digestion, then gently pipette up and down with a 5‑mL pipette until all cells are fully detached.
06. Transfer the cell suspension to a 15 mL centrifuge tube, centrifuge at 300 × g for 5 minutes, and discard the supernatant.
07. Transfer 5 mL of complete culture medium to resuspend the cells, adjust the seeding ratio as needed, and replenish the culture flask with complete medium—add up to 13–15 mL for a T75 flask and 5 mL for a T25 flask—then supplement with 1% double antibiotic solution.
08. After capping the bottle and tightening the lid, gently shake the vial to ensure uniform mixing of the cells, then place it in a 37°C incubator with 5% CO2.
cell cryopreservation
01. Prepare the cryopreservation solution and pre-cool it in advance.
02. Ensure that the cells to be cryopreserved meet the cryopreservation requirements, and verify the following conditions under a microscope: healthy appearance and morphological characteristics, being in the late logarithmic growth phase, and showing no signs of contamination or senescence.
03. Digest and centrifuge the cells (refer to the subculture protocol for specific steps).
04. Resuspend the cells in cryopreservation medium at 1 mL per tube, gently pipette up and down to ensure uniformity, then aliquot into cryovials.
05. Place the cells in a programmed cooling box and freeze them in a −80°C freezer.
06. Subsequently, the cells are transferred to a liquid nitrogen tank for long-term storage.
Copyright © Elem Biotechnology (Wuhan) Co., Ltd.
LM