Wipi2 Knockout Hepa 1-6 Cell Line
Product classification
Welcome to consult Elem's high-throughput CRISPR service.
Contact us to orderWipi2 Knockout Hepa 1-6 Cell Line
Product ID： LM02086029578
Market price
Stock surplus
0
Antibody custom service consulting
隐藏域元素占位
- 产品描述
- 细胞复苏
- 细胞传代
- 细胞冻存
- 抗体验证结果
-
- Brand: ELEM粒曼
- Commodity name: Wipi2 Knockout Hepa 1-6 Cell Line
- Commodity ID: LM02086029578
- Gene Symbol: Wipi2
- Ensembl ID: ENSMUSG00000029578
- Uniprot ID: Q80W47
- 宿主细胞 / 类型: Hepa 1-6/mouse hepatoma cells
- NCBI Gene ID: 74781
- 规格: 1×10^6 cells/frozen vial
- 生长培养基: DMEM+10%FBS+1%P,S
- 筛选标记: N/A
- 生长特性: Adherent cells, epithelial-like
- 培养条件: Incubator at 37°C with 5% CO2; passage at 1/2 to 1/4 confluence.
- 倍增时间: ~24-36 hours
- 参考换液频率: 2–3 times per week
- 支原体检测结果: Negative
- 敲除效率（Sanger测序）: 100%
- 蛋白质组验证结果: Protein-level validation has been completed.
- 抗体货号: Adding...
- 目标基因介绍: Component of the autophagy machinery that controls the major intracellular degradation process by which cytoplasmic materials are packaged into autophagosomes and delivered to lysosomes for degradation. Involved in an early step of the formation of preautophagosomal structures. Binds and is activated by phosphatidylinositol 3-phosphate (PtdIns3P) forming on membranes of the endoplasmic reticulum upon activation of the upstream ULK1 and PI3 kinases (PubMed:23051912, PubMed:23291478, PubMed:24954904). Mediates ER-isolation membranes contacts by interacting with the ULK1:RB1CC1 complex and PtdIns3P (By similarity). Once activated, WIPI2 recruits at phagophore assembly sites the ATG12-ATG5-ATG16L1 complex that directly controls the elongation of the nascent autophagosomal membrane
- 细胞开发路径: A stable KO cell line was generated using the CRISPR‑RNP approach; Sanger sequencing confirmed 100% knockout efficiency in the KO cell line.
- 应用: A gene knockout cell line with high knock-out efficiency, particularly well suited for preliminary functional analyses, the development of complex disease models, precision drug screening, and broad‑scale genetic discovery studies.
Key words:- Wipi2
-
01. Preheat the complete culture medium in a 37°C water bath.
02. Thaw the cryovial in a 37°C water bath for 1–2 minutes.
03. Transfer the cryovials into a biosafety cabinet and wipe their surfaces with 70% ethanol.
04. Unscrew the cap of the cryovial and gently transfer the cell suspension into a sterile centrifuge tube containing 9 mL of complete culture medium.
05. Centrifuge at room temperature at 125g for 5–7 minutes, then discard the supernatant.
06. Resuspend the cell pellet in 5 mL of complete culture medium, and transfer the cell suspension to a T25 culture flask.
07. Transfer the cells to a 37°C incubator with 5% CO2 for culture.
08. Recommended passage ratio: 1/2 to 1/4; cells reach confluence in 2–3 days. -
01. When the cells in the culture flask reach a confluence of 80%–90% or higher, cell passage can be performed.
02. Remove the culture medium, PBS, and trypsin (0.25% Trypsin‑EDTA, Gibco 25200‑056) from the 4°C refrigerator, place them in a 37°C water bath, and once their temperature approaches 37°C, take them out. Spray the exterior of the bottles with 75% ethanol, then transfer them to a biosafety cabinet.03. Remove the culture flask to be passaged from the incubator, spray the exterior of the flask with 75% ethanol, and place it inside a biosafety cabinet.
04. To avoid dispersing the cells, gently rinse the cells along the inner wall of the culture flask with PBS; discard the wash solution, and add 2 mL of PBS to the T25 flask.
05. Add the appropriate volume of trypsin (1.5 mL for a T75 flask, 0.5 mL for a T25 flask), and gently swirl the flask to ensure the enzyme evenly covers the cell‑covered bottom. Adjust the volume as needed based on the specific conditions. After approximately 1–2 minutes, when most of the cells have detached, add the corresponding volume of complete culture medium to stop the digestion, then gently pipette up and down with a 5‑mL pipette until all cells are fully detached.
06. Transfer the cell suspension to a 15 mL centrifuge tube, centrifuge at 300 × g for 5 minutes, and discard the supernatant.
07. Transfer 5 mL of complete culture medium to resuspend the cells, adjust the seeding ratio as needed, and replenish the culture flask with complete medium—add up to 13–15 mL for a T75 flask and 5 mL for a T25 flask—then supplement with 1% double antibiotic.
08. After capping the bottle and tightening the lid, gently shake the vial to ensure uniform cell suspension, then place it in a 37°C incubator with 5% CO2. -
01. Prepare the cryopreservation solution and pre-cool it in advance.
02. Ensure that the cells to be cryopreserved meet the required criteria, and verify the following conditions under a microscope: healthy appearance and morphological characteristics, being in the late logarithmic growth phase, and showing no signs of contamination or senescence.
03. Digest and centrifuge the cells (refer to the subculture protocol for specific steps).
04. Resuspend the cells in cryopreservation medium at 1 mL per tube, gently pipette up and down to ensure uniformity, and then aliquot into cryovials.
05. Place the cells in a programmed cooling box and freeze them in a −80°C freezer.
06. Subsequently, the cells are transferred to a liquid nitrogen tank for long-term storage. - In antibody validation
Previous Page
Next Page
Classification： Gene Knockout Cell Line（Cell Line）
Cell Line Information
Gene Symbol
Wipi2
NCBI Gene ID
74781
Ensembl ID
ENSMUSG00000029578
Uniprot ID
Q80W47
Screening marker
N/A
Host cell/type
Hepa 1-6/mouse hepatoma cells
Specifications
1×10^6 cells/frozen vial
Growth Medium
DMEM+10%FBS+1%P,S
growth characteristics
Adherent cells, epithelial-like
culture condition
Incubator at 37°C with 5% CO2; passage at 1/2 to 1/4 confluence.
doubling time
~24-36 hours
Reference fluid change frequency
2–3 times per week
Mycoplasma test results
Negative
Knock-out validation
Knockout efficiency (Sanger sequencing)
100%
Proteome Validation Results
Protein-level validation has been completed.
Antibody number
Adding...
Antibody validation results
Cell Line Description
Introduction of target gene
Component of the autophagy machinery that controls the major intracellular degradation process by which cytoplasmic materials are packaged into autophagosomes and delivered to lysosomes for degradation. Involved in an early step of the formation of preautophagosomal structures. Binds and is activated by phosphatidylinositol 3-phosphate (PtdIns3P) forming on membranes of the endoplasmic reticulum upon activation of the upstream ULK1 and PI3 kinases (PubMed:23051912, PubMed:23291478, PubMed:24954904). Mediates ER-isolation membranes contacts by interacting with the ULK1:RB1CC1 complex and PtdIns3P (By similarity). Once activated, WIPI2 recruits at phagophore assembly sites the ATG12-ATG5-ATG16L1 complex that directly controls the elongation of the nascent autophagosomal membrane
Cell development path
A stable KO cell line was generated using the CRISPR‑RNP approach; Sanger sequencing confirmed 100% knockout efficiency in the KO cell line.
Application
A gene knockout cell line with high knock-out efficiency, particularly well suited for preliminary functional analyses, the development of complex disease models, precision drug screening, and broad‑scale genetic discovery studies.
Cell Culture Instructions
Cell Resuscitation
01. Preheat the complete culture medium in a 37°C water bath.
02. Thaw the cryovial in a 37°C water bath for 1–2 minutes.
03. Transfer the cryovials into a biosafety cabinet and wipe their surfaces with 70% ethanol.
04. Unscrew the cap of the cryovial and gently transfer the cell suspension into a sterile centrifuge tube containing 9 mL of complete culture medium.
05. Centrifuge at room temperature at 125g for 5–7 minutes, then discard the supernatant.
06. Resuspend the cell pellet in 5 mL of complete culture medium, and transfer the cell suspension to a T25 culture flask.
07. Transfer the cells to a 37°C incubator with 5% CO2 for culture.
08. Recommended passage ratio: 1/2 to 1/4; cells reach confluence in 2–3 days.
cell passage
01. When the cells in the culture flask reach a confluence of 80%–90% or higher, cell passage can be performed.
02. Remove the culture medium, PBS, and trypsin (0.25% Trypsin‑EDTA, Gibco 25200‑056) from the 4°C refrigerator, place them in a 37°C water bath, and once their temperature approaches 37°C, take them out. Spray the exterior of the bottles with 75% ethanol, then transfer them to a biosafety cabinet.
03. Remove the culture flask to be passaged from the incubator, spray the exterior of the flask with 75% ethanol, and place it inside a biosafety cabinet.
04. To avoid dispersing the cells, gently rinse the cells along the inner wall of the culture flask with PBS; discard the wash solution, and add 2 mL of PBS to the T25 flask.
05. Add the appropriate volume of trypsin (1.5 mL for a T75 flask, 0.5 mL for a T25 flask), and gently swirl the flask to ensure the enzyme evenly covers the cell‑covered bottom. Adjust the volume as needed based on the specific conditions. After approximately 1–2 minutes, when most of the cells have detached, add the corresponding volume of complete culture medium to stop the digestion, then gently pipette up and down with a 5‑mL pipette until all cells are fully detached.
06. Transfer the cell suspension to a 15 mL centrifuge tube, centrifuge at 300 × g for 5 minutes, and discard the supernatant.
07. Transfer 5 mL of complete culture medium to resuspend the cells, adjust the seeding ratio as needed, and replenish the culture flask with complete medium—add up to 13–15 mL for a T75 flask and 5 mL for a T25 flask—then supplement with 1% double antibiotic.
08. After capping the bottle and tightening the lid, gently shake the vial to ensure uniform cell suspension, then place it in a 37°C incubator with 5% CO2.
cell cryopreservation
01. Prepare the cryopreservation solution and pre-cool it in advance.
02. Ensure that the cells to be cryopreserved meet the required criteria, and verify the following conditions under a microscope: healthy appearance and morphological characteristics, being in the late logarithmic growth phase, and showing no signs of contamination or senescence.
03. Digest and centrifuge the cells (refer to the subculture protocol for specific steps).
04. Resuspend the cells in cryopreservation medium at 1 mL per tube, gently pipette up and down to ensure uniformity, and then aliquot into cryovials.
05. Place the cells in a programmed cooling box and freeze them in a −80°C freezer.
06. Subsequently, the cells are transferred to a liquid nitrogen tank for long-term storage.
Copyright © Elem Biotechnology (Wuhan) Co., Ltd.
LM